SAFETY INSTRUCTIONS .:',',','
DIGITAL WATER IONIZER
^
Do not disassemble, repair, and/or modify.
> Personal safety could be compromised.
> For repairs, please contact one of our authorized sales agents.
Use only sanitary and drinkable water (municipal water, etc.).
!
-_
\
h
|
"0
( !" ) Before operating the unit, allow the unit to perform water input and output
for 2 ~ 3 minutes.
(
s Never allow hot water input in the unit"
~ This may cause severe damage to its
m filter and electrolytic chamber.
^, Never spray the unit with water or clean the unit with water or other liquids.
> Recommended cleaning products are micro fiber or soft cloths.
A Do not clog, bend, twist, or kink the water input or output hoses.
n > Make sure the water hoses are not constricted to ensure proper flow of the water in and out
of the unit
-
"0
To Next Page
