40"
28"
42"
MODEL 4355H
SPECIFICATIONS
04-26-05 Z08-05016
PUMP......................................................................P/N N07-00016-LH
PUMP PULLEY....................................................................R03-00774
PUMP PULLEY BUSHING..................................................R04-00001
UNLOADER..................................................................P/N C07-03800
ENGINE HORSEPOWER............................................ 13 HP / 9.7 KW
ENGINE MAKE........................................................................ HONDA
ENGINE CHARGE RATE.........................................................18 AMP
ENGINE PART NUMBER............................................ P/N F05-00488
ENGINE PULLEY............................................................... R03-00732
ENGINE PULLEY BUSHING ............................................ R04-00006
ENGINE OIL FILTER...................................................................... N/A
ENGINE AIR FILTER.............................................P/N F05-004462-10
ENGINE AIR PRE-CLEANER........................................................ N/A
MACHINE VOLTAGE..........................................12 VDC CONTROLS
SWITCH, SOLENOID ...................................................P/N F05-00992
SWITCH, FLOW ...........................................................P/N F04-00805
BATTERY .......................................................................... GROUP 24
BATTERY CABLE - STARTER............................... P/N F05-00218-1
BATTERY CABLE - STARTER............................... P/N F05-00218-1
BURNER ..................................................................... P/N V00-17140
BURNER TYPE........................................... PRESSURE ATOMIZING
FUEL TYPE.......................................KEROSENE, #1 OR #2 DIESEL
FUEL PRESSURE......................................................120 PSI / 8 BAR
FUEL NOZZLE........................(1.50 90 DEGREE A) P/N V1.50 90DA
FUEL CONSUMPTION................................. 1.64 GPHR / 6.20 LPHR
FUEL PUMP......................................(DAN FOSS) P/N V-100714-001
FUEL SOLENOID - 115V ............................................ P/N F04-00974
MOTOR HORSEPOWER............................................................1/4 HP
DISCHARGE VOLUME........................................4.0 GPM / 15.1 LPM
PUMP HEAD PRESSURE....................................3500 PSI / 242 BAR
TEMPERATURE RISE............105°F @ 4.0 GPM / 41°C @ 15.1 LPM
COMBUSTION SMOKE/BACHARACH SCALE....#1 OR #2 SMOKE
CARBON MONOXIDE ALLOWED............................................ 0.01%
DRAFT/STACK INSTALLATION............. 0.2” - 0.04” WC READING
HEAT INPUT............................. 229,600 BTU/HR / 57,859 KCAL/HR
MINIMUM INLET WATER PRESSURE..................40 PSI / 0.68 BAR
WEIGHT (DRY) .......................................................340 LBS / 154 KG
HOSE, PUMP TO UNLOADER.............................. P/N K02-03117A1
HOSE, UNLOADER TO COIL................................ P/N K02-03124A1
SPRAY TIP.........................................(#4.0-15DEG) P/N J00-15040-2
HOSE, DISCHARGE..............................3/8” X 50’ P/N K02-03150E1
WAND & TRIGGER GUN......................................... P/N J06-00158-B
BELT - ENGINE TO PUMP......................................... P/N R02-00245
COIL SIZE................. 14” DIAMETER - 1/2”ID X 95’ SCHEDULE 80
REPLACEMENT COIL ........................................... P/N 4405F-00206
COIL BACK PRESSURE (NEW)
.....................5 PSI @ 4.0 GPM / 0.34 BAR @ 15.1 LPM
COIL BACK PRESSURE REQUIRING DESCALING
........................... 50 PSI @ 4.0 GPM / 3.40 @ 15.1 LPM
To Next Page
General