To Next PageTo Next Page
Need help?Do you have a question about the All-Power APE7015SE and is the answer not in the manual?
General| Displacement | 212cc |
|---|---|
| Compression Ratio | 8.5:1 |
| Fuel System | Carburetor |
| Fuel Type | Gasoline |
| Fuel Tank Capacity | 3.6 L |
| Oil Capacity | 0.6 L |
| Starting System | Recoil Start |
| Lubrication System | Splash |
| Engine Type | 4-stroke, OHV, single cylinder |
| Ignition System | Transistorized |
| Cooling System | Air-Cooled |
| Bore x Stroke | 70mm x 55mm |
Explains hazard symbols and signal words used for safety information.
Defines DANGER, WARNING, and CAUTION levels for potential hazards.
Provides specific warnings about engine exhaust, prohibited uses, and initial oil check.
Details safe handling of gasoline and prevention of fires or explosions.
Warns about carbon monoxide, kickback, and risks from sparking.
Warns about entanglement with rotating parts and risks of unintentional start-up.
Outlines safety steps before making adjustments or repairs, including spark plug disconnection.
Identifies and describes the various features and controls of the engine.
Provides guidance on selecting the appropriate oil viscosity based on temperature.
Detailed instructions on how to check and add engine oil correctly.
Specifies required fuel types and considerations for high altitude operation.
Step-by-step guide with illustrations for safely adding fuel to the engine.
Instructions on how to safely start the engine using recoil or electric start.
Details safety for starting, electric start connection, and engine warm-up.
Outlines the safe method for shutting down the engine using the safety key and fuel valve.
Schedules regular maintenance tasks like oil changes and spark plug replacement.
Information on emissions control systems and their maintenance by authorized personnel.
Warns against unauthorized carburetor adjustments to maintain factory settings.
Step-by-step instructions for replacing the spark plug, including gap setting.
Guidance on inspecting the muffler and spark arrester for debris and damage.
Comprehensive guide for draining old oil and adding new oil to the engine.
Advice on storing the engine and fuel, including the use of fuel stabilizer.
Instructions on the hazardous waste disposal of used engine oil.
Details for APE7009SE and APE7015SE models, including displacement and oil capacity.
Key settings for spark plug gap, torque, and valve clearance.
Details warranty terms, responsibilities, and items not covered.
Lists specific engine parts covered under the emissions warranty.
Explains emissions compliance periods for different engine sizes.
