EasyManuals Logo

All-Power APG3014G User Manual

All-Power APG3014G
38 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
OWNER’S MANUAL
11
2) ENGINE OIL REPLACEMENT
3) AIR FILTER
1. Place the machine on a level surface
and warm up the engine for several
minutes. Then stop the engine.
2. Remove the oil filler cap.
3. Place an oil pan under the engine.
Remove the oil drain plug so that the
oil can be completely drained.
4. Check the oil drain plug, gasket, oil filler
cap and O-ring. If damaged replace.
5. Add engine oil to the upper level.
6. Reinstall the oil drain plug.
Maintaining an air cleaner in proper condition
is very important.
Dirt induced through improperly installed,
improperly serviced or inadequate elements
damages and wears out engines.
Keep the element always clean.
1. Take out the air cleaner, clean it well in
kerosenee and dry it.
BE SURE NO FOREIGN MATERIAL
ENTERS THE CRANKCASE.
CAUTION:
0
o
C 25
o
C
32
o
F 80
o
F
C SAE 10W B SAE #20 A SAE #30
or 10W-30 or 10W-30 or 10W-10
or 10W 40 or 10W-40 or 10W-40

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the All-Power APG3014G and is the answer not in the manual?

All-Power APG3014G Specifications

General IconGeneral
BrandAll-Power
ModelAPG3014G
CategoryPortable Generator
LanguageEnglish

Related product manuals