2000 WATT GENERATOR
12
2. After wetting the element by clean engine oil , squeeze it tight by hand.
3. Lastly , put the element in the case and install it securely.
The engine should never run without the element; excessive piston and/or
cylinder may wear.
4) MUFFLER
The engine and muffler will be very hot after the engine has been run.
Avoid toughing the engine and muffler while they are still hot with any part
of your body or clothing during inspection or repair.
1. Remove the muffler from the engine.
2. Clean the carbon deposits out of the
muffler using a wire brush.
3. Check the muffler , Replace it if damaged.
4. Install the muffler to the engine.
7. TROUBLE SHOOTING
1) Engine fails to start
1. Fuel system
No fuel supplied to combustion chamber.
- No fuel in tank-Supply fuel
- Clogged fuel line-Clean fuel line.
- Foreign matter in fuel cock-Clean fuel or if closed , open it.
- Clogged carburetor-Clean carburetor
CAUTION:
WARNING:
To Next Page
Loading...
Need help?
General
