SPECIFICATIONS
Accuracy is specified for a period of one year after
calibration and at 18°C to 28°C, with relative humidity
< 75%. Accuracy specifications take the form of:
± ([% of Reading] + [number of Least Significant Digits])
3
1. Display
3
1
/2-digit LCD, with a max. reading of 1999
2. "
" Button
Press this " " button to turn on the backlight. The
backlight will turns off automatically about 10 secs later.
3. Function / Range Switch
Used to select desired function and range as well as to
turn on or off the meter.
To preserve battery life, set this switch to the " OFF "
position when the meter is not in use.
4. " " Button
Press this " " button to hold the present reading on
the display, the symbol " " will appear on the display
as an indication. To exit the Data Hold mode, just press
this button again. " " disappears.
5. Holster
6. Test Probes
To Next Page
Loading...