Need help?Do you have a question about the All Swim POOLSTYLE GHD-150-0320 and is the answer not in the manual?
Manual contains essential information for use and installation; follow safety guidelines.
Must be installed/removed by professionals; no unauthorized dismantling or refitting.
Keep away from fire sources; installation must be well-ventilated, not in closed or indoor environments.
Install in well-ventilated area with stable power supply and pool filter.
Start water pump before heat pump; turn off heat pump before water pump to prevent damage.
Ensure power supply matches product specifications and use appropriate protection devices.
Ensure safe power plug connection; do not disconnect while running; use undamaged wires.
Condensation on evaporator fins may occur due to cooling, sometimes mistaken for leaks.
Shows current water temperature, e.g., 28°C.
Turn on/off, adjust water temperature using buttons, and understand defrosting indicator.
Addresses common failures like no power, insufficient heating, and display issues.
Lists failure codes (PP1-PP7, EE1-EE3) and their descriptions for system diagnostics.
Includes setting environment, clearing obstacles, cleaning, and checking connections.
Contact dealer for abnormal conditions; do not disassemble; ensure power is off before repair.
General| Heating Capacity | 15 kW |
|---|---|
| Max Water Temperature | 40°C |
| Refrigerant | R32 |
| Power Supply | 220-240V/1Ph/50Hz |
| Operating Ambient Temperature | -7°C to 43°C |
To Next Page
