Need help?Do you have a question about the ALL-TEST PRO MOTOR GENIE and is the answer not in the manual?
Warnings and considerations for safe and accurate operation and data collection.
General safety guidelines for using the MOTOR GENIE™ motor tester.
Explains the instrument's three working areas: Input, Display, and Keypad sections.
Describes the external connections provided by the instrument's input section.
Measures winding impedance, phase angle, current frequency response, and resistance.
Details the procedure for performing phase-to-phase resistance tests.
Explains how to calculate impedance unbalance between phases for motor analysis.
Guides users on selecting different test frequencies for winding tests.
How to reset the instrument if it becomes unresponsive.
Instructions on how to view the instrument's firmware version.
Provides tables and guidelines for interpreting motor test results.
Discusses how test location affects fault diagnosis.
Guidelines for identifying developing winding shorts using test results.
Procedure to perform a rotor compensated winding test.
Procedure to confirm winding faults using variable frequency tests.
Lists available accessories for the MOTOR GENIE™ instrument.
Warnings and considerations for safe and accurate operation and data collection.
General safety guidelines for using the MOTOR GENIE™ motor tester.
Explains the instrument's three working areas: Input, Display, and Keypad sections.
Describes the external connections provided by the instrument's input section.
Measures winding impedance, phase angle, current frequency response, and resistance.
Details the procedure for performing phase-to-phase resistance tests.
Explains how to calculate impedance unbalance between phases for motor analysis.
Guides users on selecting different test frequencies for winding tests.
How to reset the instrument if it becomes unresponsive.
Instructions on how to view the instrument's firmware version.
Provides tables and guidelines for interpreting motor test results.
Discusses how test location affects fault diagnosis.
Guidelines for identifying developing winding shorts using test results.
Procedure to perform a rotor compensated winding test.
Procedure to confirm winding faults using variable frequency tests.
Lists available accessories for the MOTOR GENIE™ instrument.
General| Model | MOTOR GENIE |
|---|---|
| Category | Test Equipment |
| Insulation Resistance | Up to 1000MΩ |
| Display | LCD |
| Power Source | Rechargeable Battery |
| Memory | Internal Storage for Test Results |
| Interface | USB |
| Operating Temperature | -10°C to 50°C |
| Type | Motor Tester |
| Capacitance Range | 0.1μF to 999 µF |
| Test Method | Static (Power-Off) |
| Test Parameters | Resistance, Inductance, Capacitance, Insulation |
| Weight | 500g |
To Next Page