ALLECO 9750 - Page 51

49
EN
You can set four events for every day:
wakeup out home and night .
When programming you specify the
desired time and temperature for every
event.
Preset means that the program runs
every day, but you can also programme
each day individually.
Press and navigate to SET. Select with
. Navigate to 4E, select with . Now
you will see
MD TU WE TH FR SA SU
. Press .
Wakeup
is shown together with the
current time and temperature.
The time ashes. Navigate until you
reach the time you want the wakeup
event to occur. Set hours rst and
conrm with
, then repeat for minutes
and conrm with .
Navigate to the desired temperature
for wakeup. Conrm with
.
Out is shown. Repeat the steps
above to set time and temperature.
Home is shown. Repeat the steps
above to set time and temperature.
49
EN