Allegro Reformer User Manual

11
How to assemble the Allegro® Reformer
PARTS LIST
Part number Quantity Description
950-002 1 Complete footbar
950-020 1 kit Pivot bolts and washers
950-007 1 pair Shoulder rest with brackets
GEN8000 2 Twist lock plunger knobs
210-026 1 pair Ropes
101-008 1 pair Double loops
950-081 2 Allegro riser with pulley
GEN9050 1 5/16” Allen wrench
ALL0060 1 Allegro wrench
SPR9070 3 Red spring
SPR9071 1 Blue spring
SPR9241 1 Yellow spring
DVD8121 1 Introductory DVD
IMPORTANT PRECAUTIONS:
PLEASE READ WARNING
To reduce the risk of serious injury, read the following
important precautions before using the Allegro.
» Read all instructions in this manual before using the
Allegro. Review the Setup and Safety video included with
the Allegro before using the equipment. Use the Allegro
only as described in these instructions and the video.
» It is the responsibility of the owner to ensure that all users
of the Allegro are adequately informed of all precautions.
» Use the Allegro only on a level surface. Keep hands and
feet away from all moving parts. When the Allegro is
not in use, leave at least two springs connected to the
carriage. Keep children under the age of 12 and pets away
from the Allegro at all times.
» If you feel pain, dizziness, or shortness of breath, stop
exercising immediately.
» Before beginning any exercise program, consult your
physician.

Allegro Reformer Specifications

General

Category	Fitness Equipment
Type	Reformer
Springs	5
Weight Capacity	300 lbs
Dimensions	14" H
Included Accessories	Box, Foot Straps
Carriage Material	Vinyl Upholstery

Summary

IMPORTANT PRECAUTIONS

Safety Guidelines for User Operation

Read instructions, use as intended, stop if unwell, consult physician, keep clear of hazards.

ASSEMBLY: INSTALLATION STEPS

Install Shoulder Rests

Remove locking pins and attach shoulder rests to the carriage.

Install Plunger Knobs

Screw plunger knobs into the large hole until threaded.

Install Footbar

Align spring pins, pivot, and secure footbar with bolts and washers.

ASSEMBLY, STORAGE, AND MAINTENANCE

Install Risers

Insert risers through frame, orient pulleys, and reinsert locking pins.

Attach Ropes

Clip rope loops to shoulder rests, thread through pulleys, and secure in cleats.

Storage Procedures

Instructions for stacking and standing storage of the Allegro Reformer.

Cleaning and Lubrication

Routine cleaning and lubrication of moving parts like pulleys and channels.

Ongoing Maintenance and Support

Spring replacement, repairs, and customer support contact information.