EasyManua.ls Logo

ALLEN & HEATH dLive CDM64 - User Manual

ALLEN & HEATH dLive CDM64
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
MixRack Getting Started Guide
CDM32, CDM48, CDM64
Before starting please check for the latest dLive
firmware and documentation.
AP10643
Question and Answer IconNeed help?

Do you have a question about the ALLEN & HEATH dLive CDM64 and is the answer not in the manual?

ALLEN & HEATH dLive CDM64 Specifications

General IconGeneral
Mic Preamps64
Sample Rate96kHz
FadersN/A (MixRack - requires control surface)
EQ Bands4-band parametric EQ on inputs, GEQ on outputs
Word ClockBNC Word Clock I/O
MIDI I/OYes
Data PortsEthernet, USB
Processing Delay<0.7ms
Control Surface CompatibilitydLive Surfaces
Network AudioGigaACE, Waves, Dante
Power SupplyDual redundant PSUs

Summary

IMPORTANT - Read before starting

Safety instructions

Instructions for safe operation and warnings to protect users and equipment.

General precautions

Advises on protecting equipment from damage, environmental factors, and proper cleaning.

1. Introduction

1.1 dLive MixRacks

Provides an overview of dLive MixRack models and their key features.

2. Installing the MixRack

3. Rear Panel Overview

Mic;Line Inputs

Describes the balanced XLR inputs for microphones and line-level signals.

Line outputs

Details the balanced XLR line-level outputs for audio signals.

Rear Panel Connectivity

4. Front Panel

5. Connect and Power Up

5.1 Surface Connection

Instructions for connecting the dLive Surface to the MixRack via gigaACE.

5.4 Connect a Laptop or Wireless Router

7. Technical Specs

Inputs

Specifications for microphone/line inputs, preamp, sensitivity, gain, pad, and impedance.

Outputs

Specifications for analogue XLR outputs, impedance, nominal and maximum levels.

Related product manuals