To Next PageTo Next Page
Need help?Do you have a question about the Allen-Bradley 1746-IB16 and is the answer not in the manual?
General| Category | I/O Systems |
|---|---|
| Manufacturer | Allen-Bradley |
| Part Number | 1746-IB16 |
| Module Type | Input Module |
| Number of Inputs | 16 |
| Input Voltage | 24V DC |
| Series | SLC 500 |
| Product Type | Digital Input |
| Isolation Voltage | 1500V AC |
| Isolation Voltage (Continuous) | 50V |
| Compatibility | SLC 500 |
| Operating Temperature | 0°C to 60°C |
| Temperature Range | 0°C to 60°C |
| Storage Temperature | -40°C to 85°C |
| Voltage Category | 24V DC |
Warning about explosion hazard in hazardous locations and safety precautions.
ATTENTION: Never install, remove, or wire modules with power applied to chassis.
Detailed steps for sliding the module into the chassis and securing wires.
Explains fuse protection for 1746-OBP16 and 1746-OVP16 modules.
Explains fuse protection for the 1746-OAP12 module.
Describes diagnostics for blown fuses, including LED indicators and processor errors.
Describes processor operation when JP1 is set for no notification upon fuse blow.
Describes processor fault generation when JP1 is set for fault notification.
Steps to recover from blown fuse, processor fault, or shutdown conditions.
Detailed steps on how to safely replace a blown fuse in the module.
