Allen-Bradley Bulletin 1694 - Mounting and Removal Procedures; Mounting Modules on DIN Rail; Removing Modules from DIN Rail; General Installation Recommendations

Mounting on or removing of 1694-… from symmetrical rail
General recommendation for all 1694 modules installation.
Please note
User Manual: Bulletin 1694 Electronic circuit protection for 24V DC
19
Sliding on DIN rail is not permitted.
Open connector arm carefully to avoid damage
Screwdriver for installation:
- blade-style screwdriver size 1 for smaller Push-in terminal (PT 2.5) inserts
- blade-style screwdriver size 4 for larger Push-in terminal (PT 10) inserts
Mounting position:
- horizontal mounting position is preferred
Connector arm
can be closed
Push 1694 PM...
towards rail
Latch on enclosure
downwards
Unlatch with srewdriver,
tilt upwards and remove
(connector arm can be closed)
Mount 1694 PM...
side-by-side
with 1694 PF…
Remove 1694 PM... from rail
Publication 1694-IN002D-EN-E - June 2020 DIR 10005220601 (Version 03)