EasyManuals Logo
Home>Allen-Bradley>Controller>ControlNet PLC-5

Allen-Bradley ControlNet PLC-5 Quick Start

Allen-Bradley ControlNet PLC-5
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
10 ControlNet PLC-5 Hot Backup System
Publication 1785-10.8 - October 1998
The following warnings apply to products
having CSA certification for use in hazardous
locations.
Les avertissements suivants s’appliquent aux
produits ayant la certification CSA pour leur
utilisation dans des emplacements dangereux.
ATTENTION: Explosion hazard
Substitution of components may impair
suitability for Class I, Division 2.
Do not replace components unless power
has been switched off or the area is known
to be non-hazardous.
Do not disconnect equipment unless power
has been switched off or the area is known
to be non-hazardous.
Do not disconnect connectors unless power
has been switched off or the area is known
to be non-hazardous. Secure any user-
supplied connectors that mate to external
circuits on an Allen-Bradley product using
screws, sliding latches, threaded
connectors, or other means such that any
connection can withstand a 15 Newton (3.4
lb.) separating force applied for a minimum
of one minute.
AVERTISSEMENT: Risque
d’explosion
La substitution de composants peut rendre
ce matériel inacceptable pour
lesemplacements de Classe I, Division 2.
Couper le courant ou s’assurer
quel’emplacement est désigné non
dangereux avant de remplacer
lescomposants.
Avant debrancher l’équipement, couper
le courant ou s’assurer que l’emplacement
est désigné non dangereux.
Avant de débrancher les connecteurs, couper
le courant ou s’assurer que l’emplacement est
reconnu non dangereux. Attacher tous
connecteurs fournis par l’utilisateur et reliés
aux circuits externes d’un appareil Allen-
Bradley à l ’aide de vis, loquets coulissants,
connecteurs filetés ou autres moyens
permettant aux connexions de résister à une
force de séparation de 15 newtons (3,4 lb. -
1,5 kg) appliquée pendant au moins une
minute.
CSA Hazardous Location Approval
Approbation d’utilisation dans des
emplacements dangereux par la CSA
CL I, DIV 2
GP A,B,C,D
TEMP
Look for temperature
code rating here.
CL I, DIV 2
GP A,B,C,D
TEMP
Le code de température
est indiqué ici.
! !

Other manuals for Allen-Bradley ControlNet PLC-5

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Allen-Bradley ControlNet PLC-5 and is the answer not in the manual?

Allen-Bradley ControlNet PLC-5 Specifications

General IconGeneral
BrandAllen-Bradley
ModelControlNet PLC-5
CategoryController
LanguageEnglish

Related product manuals