Rockwell Automation Publication 2080-UM003A-EN-E - March 2013 63
Expansion I/O Data Mapping Appendix B
Calibration of Analog
Modules
The analog modules are shipped to you calibrated.
Specifications
See Expansion I/O on page 240 for a list of specifications for each of the analog
and digital expansion I/O modules.
Sx Channel Fault Indicates there is an error associated with the channel x.
Tx Thermocouple
compensation
Indicates that the thermocouple compensation of channel x is
not working. This is effective for thermocouple type only.
Ux Underrange Indicates that the input of channel x is at the minimum end of
its normal operating range. The module automatically resets
the bit when the under-range condition is cleared and the data
value is within the normal operating range.
Field Descriptions for 2085-IRT4
Field Description
To Next Page
Loading...
