Allen-Bradley Powermonitor 3000 - Page 101

Publication 1404-UM001D-EN-E - October 2004
Communications 4-41
Figure 4.6 PLC-5/xxE MultiHop Configuration
The example below shows the MultiHop configuration for messaging
from a PLC-5/xxC ControlNet processor through a ControlLogix
Gateway to an Ethernet Powermonitor 3000.
Figure 4.7 PLC-5/xxC via ControlLogix Gateway MultiHop Configuration
You may choose between two types of ControlLogix to Powermonitor
3000 messaging:
• PLC-5 Typed read or write, which encapsulates a PCCC message
within a CIP wrapper
• CIP Generic messaging which uses the CIP
class/instance/attribute object model common to DeviceNet
Set up the Communication tab in the ControlLogix message instruction
the same for each messaging type, as shown in the first example
below:
Allen-Bradley HMIs