To Next PageTo Next Page
Need help?Do you have a question about the Allen-Bradley SensaGuard 440N-Z21SS2H-AS and is the answer not in the manual?
General| Category | Security Sensors |
|---|---|
| Series | SensaGuard |
| Model | 440N-Z21SS2H-AS |
| Voltage Rating | 24 V DC |
| Supply Voltage | 20-30 V DC |
| Current Rating | 200 mA |
| Enclosure Rating | IP67 |
| Housing Material | Plastic |
| Operating Temperature | -25°C to 70°C |
| Electrical Life | 100, 000 operations |
| Connection Type | Connector |
| Safety Rating | SIL 3 |
| Type | Non-contact |
| Output Type | Solid State |
| Mechanical Life | 10 million operations |
Explains the meaning of the "Status/Diag" LED states.
Shows wiring for M12 and cordset versions.
Explains LED states and troubleshooting based on status.
Details troubleshooting steps and expected states for series configurations.
Illustrates the time taken for signals to propagate through sensors and actuators.
Wiring examples for one sensor with MSR127 relays.
