Why is the water pressure low in my Allen + Roth FP1B4207CP?
If you're experiencing low water pressure with your Allen + Roth Kitchen & Bath Fixtures, the spray head might be dirty or not fitted correctly. Remove the spray head and inspect it for any debris. Also, make sure the rubber washer is correctly installed.
What to do if water leaks from the spray head of Allen + Roth Kitchen & Bath Fixtures?
If water is leaking from the spray head of your Allen + Roth Kitchen & Bath Fixtures, the cartridge likely needs replacement. Remove the handle assembly, trim cap, and locking nut. Take out the old cartridge and put in a new one before reassembling the unit.
How to fix a leak from under the handle of Allen + Roth Kitchen & Bath Fixtures?
If you notice a leak coming from under the handle of your Allen + Roth Kitchen & Bath Fixtures, it could be due to a loose trim cap or a faulty O-ring on the cartridge. Try tightening the trim cap first. If the leak persists, the O-ring may be dirty or damaged; clean or replace it as needed.
Product installation by licensed plumber; avoid putty on plastic; no hose torsion or damage.
Verify parts, note assembly time, required tools, and pre-installation steps for water lines.
Addresses common issues like leaks from handle or spray head, and low water pressure with corrective actions.
Details limited lifetime warranty, coverage, exclusions, and claims process.
General| Brand | allen + roth |
|---|---|
| Model | FP1B4207CP |
| Category | Kitchen & Bath Fixtures |
| Finish | Chrome |
| Installation Type | Wall mount |
| Handle Type | Lever |
| ADA Compliant | Yes |
| WaterSense Certified | No |
| Number of Spray Patterns | 1 |
To Next Page
