Allen + Roth LWSK48VG User Manual

2
Maximum load 200 lb. (90.71 kg)
Maximum load 30 lb. (13.6 kg)
Maximum load 10 lb. (4.5 kg)
Serial Number Purchase Date
ATTACH YOUR RECEIPT HERE
MODEL # LWSK48VG, LWSK48VW
VANITY WITH TOP
1
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble or install the product.
WARNING
CAUTION
Do not stand on vanity. Use vanity on level ground. Base
vanity supports a maximum weight of 200 lbs. Exceeding
maximum weight limit will compromise the integrity of the
vanity structure and could cause the vanity to fail.
Failure to follow cautions could result in serious injury.
Do not hang from the vanity.
Do not taking o󰀨 the vanity top to avoid damaging the vanity.
Clean all uids from the stone surface to prevent stains. Wipe o󰀨 the soap or toothpaste immediately to prevent
permanent damage to the stone surface.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and
hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 30 minutes
Tools Required (not included): Silicone compound, Phillips screwdriver, Level, Stud Finder, Pencil, Variable Speed Drill.
PACKAGE CONTENTS
PART DESCRIPTION QUANTITY
A Vanity Top 1
B Vanity Base 1
C Backsplash 1
Français p. 9
Español p. 17
welcoming • sophisticated • inspiring
allen + roth
®
is a registered trademark
of LF, LLC. All Rights Reserved.
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-866-439-9800, 8 a.m. – 8 p.m., EST, Monday - Friday.
B
C
A

Allen + Roth LWSK48VG Specifications

General

Brand	Allen + Roth
Model	LWSK48VG
Category	Indoor Furnishing
Language	English

Summary

Vanity With Top Product Information

Package Contents

Lists all parts included in the package: Vanity Top, Vanity Base, and Backsplash.

Safety Information and Warnings

Crucial safety warnings, weight limits, and handling precautions before assembly or installation.

Preparation for Assembly

Pre-assembly steps including checking parts, required tools, and initial setup advice.

Vanity Assembly Instructions

Step 1-3: Initial Assembly Steps

Instructions cover removing the stone top, applying silicone, and marking wall placement.

Step 4-6: Vanity Positioning and Leveling

Guidance on moving the vanity into place, installing plumbing, and adjusting floor levelers.

Step 7: Backsplash Installation

Detailed steps for mounting the backsplash to the vanity top and the wall.

Step 8: Adjustable Shelf Repositioning

Instructions for removing, repositioning, and reattaching the adjustable shelf and supports.

Step 9: Vanity Door Adjustment

Methods for adjusting vanity doors to ensure proper alignment and closure.

Step 10: Drawer Removal and Replacement

Procedures for safely removing and reinserting the vanity drawers.

Care, Maintenance, and Warranty

Care and Maintenance Guidelines

Recommendations for dusting, cleaning the vanity body and stone top, and protecting the finish.

One-Year Limited Warranty Details

Information on the manufacturer's one-year limited warranty, coverage, and exclusions.

Replacement Parts List

A list of available replacement parts with their corresponding part numbers for ordering.