Allen + Roth VBL4-18CH User Manual

ITEM #0970848
0970849
1010727
MODEL #VBL4-18CH
VBL4-24BZ
VBL4-24BNK
VANITY LIGHT
AB171084
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-866-439-9800, 8 a.m. - 6 p.m., EST, Monday - Thursday,
8 a.m. - 5 p.m., EST, Friday.
1
Purchase Date
ATTACH YOUR RECEIPT HERE
welcoming • sophisticated • inspiring
allen + roth
®
is a registered trademark
of LF, LLC. All Rights Reserved.
Français p. 9
Español p. 17
Model VBL4-24BZ
VBL4-24BNK
Model VBL4-18CH
800192
APPROVED FOR USE
IN DAMP LOCATIONS

Allen + Roth VBL4-18CH Specifications

General

Brand	Allen + Roth
Model	VBL4-18CH
Type	Lantern
Finish	Chrome
Power Source	Hardwired
Light Source	LED
Material	Metal
Mounting Type	Wall Mount
Style	Modern/Contemporary

Summary

Package Contents

Hardware Contents

Safety Information

Preparation

Assembly Instructions

Turn off circuit breakers and wall switch

Disconnect power supply to the fixture before installation to prevent injury or death.

Remove existing fixture and disconnect wiring

Safely detach the old fixture and disconnect all electrical wiring connections.

Remove mounting plate from fixture

Detach the mounting plate from the fixture, saving the screws for later use.

Determine fixture location and mark hole

Position the mounting plate, mark hole locations, drill, and insert plastic anchors.

Attach mounting plate to outlet box

Secure the mounting plate to the outlet box using appropriate screws.

Prepare and connect fixture wires

Strip wire ends and connect fixture wires to house wires using wire connectors.

Secure wire connections and tuck wires

Wrap connections with tape and carefully push all wiring back into the outlet box.

Attach fixture to mounting plate

Mount the fixture to the plate, using a level for alignment before fully tightening.

Restore power and test fixture

Reconnect power at the breaker and test the fixture's functionality.

Care and Maintenance

Troubleshooting

Warranty