EasyManua.ls Logo

Allen + Roth VFL3-RO24DRL User Manual

Allen + Roth VFL3-RO24DRL
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
VENT-FREE
GAS LOG SET
MODEL # VFL3-RO24DRL
INSTALLER: Leave this manual with the appliance.
CONSUMER: Retain this manual for future reference.
WARNING: This appliance is equipped for (Natural and Propane) gas. Field conversion is not
permitted other than between natural or propane gases.
Dual Fuel
80-10-443 - 2022-04-22
AS22226
ANS Z21.11.2 2019
NG LP
C US
C US
Patent Pending
Dual Fuel System
ALLEN + ROTH
and logo design are
trademarks or registered trademarks of
LF, LLC. All rights reserved.
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-877-447-4768, 8:30 a.m. – 4:30 p.m., CST, Monday – Friday or
email us at customerservice@ghpgroupinc.com.
ITEM# 4976268
Question and Answer IconNeed help?

Do you have a question about the Allen + Roth VFL3-RO24DRL and is the answer not in the manual?

Allen + Roth VFL3-RO24DRL Specifications

General IconGeneral
BrandAllen + Roth
ModelVFL3-RO24DRL
CategoryGas Heater
LanguageEnglish

Summary

Safety Information

General Safety Precautions

General safety precautions and warnings for safe operation and installation.

Fire, Explosion, and Asphyxiation Hazards

Hazards from improper adjustment, alteration, service, or installation of the heater.

Gas Leak and CO Poisoning Procedures

Steps for gas leaks & CO poisoning, and Prop 65 warnings.

Product Features

Dual Fuel Capability

Heater operates on propane or natural gas and can be converted.

Safety Pilot System

Features an Oxygen Depletion Sensing (ODS) safety shutoff for safety.

Ignition and Heat Control

Electric ignition system and thermostat heat control for convenience.

Preparing for Installation

Water Vapor and Ventilation

Discusses water vapor by-products and air for combustion/ventilation.

Adequate Ventilation Requirements

Classifications and requirements for producing adequate ventilation.

Installation Procedures

Gas Type and Log Sizing

Checking gas type and requirements for log set sizing.

Clearances and Placement

Safety clearances for installation, including combustible materials and mantels.

Gas Connection and Testing

Procedures for connecting to gas supply and testing for leaks.

Assembly Instructions

Log Placement

Step-by-step guide for placing logs #1, #2, #3 and #4.

Optional and Final Log Placement

Instructions for placing optional logs #7 & #8.

Ember Fiber Installation

Optional accessory installation for simulating glowing embers.

Operation

Safety Before Lighting

Safety checks and actions before lighting the appliance.

Lighting and Shutting Off

Step-by-step guide for lighting the pilot and turning off the gas.

Remote Control Operation

Transmitter and Receiver Setup

Overview of transmitter functions and receiver setup.

Manual and Thermostat Modes

Operating in manual mode and setting thermostat temperature.

Learning Transmitter to Receiver

Procedure to pair the transmitter with the receiver.

Care and Maintenance

Burner and Pilot Inspection

Checking pilot flame pattern and burner flame patterns.

Burner Cleaning Procedures

Cleaning burner orifices and air inlets for optimal performance.

Troubleshooting

Ignition and Gas Supply Issues

Common problems with gas leaks, ignition, and supply.

Flame and Burner Performance

Issues like no ignition, backfiring, or incorrect flame.

Heater Shutoff and Odor Troubleshooting

Problems with ODS shutoff, odors, or whistling noises.

Replacement Parts List

Parts Identification and Ordering

List of replaceable parts with item numbers and part numbers.

Related product manuals