allen HDX600 - Page 2

To Next Page

To Previous Page

This manual, or a copy of it, must be kept with the machine at all times.

There is a manual storage container located on the machine for your convenience.

SAFETY & OPERATOR MANUAL

This manual covers the products listed below:

Part No. Description

068360 HDX600 Riding Trowel, HATZ 50HP Diesel T4, 8ft

Riding TRowel

All information, specifications, and illustrations in this manual are subject to change without notice and are based on the latest

information at the time of publication. No part of this manual may be reproduced or transmitted in any form or by any means,

electronics or mechanical, for any purpose, without the express written permission of Allen Engineering Corporation (AEC). AEC

assumes no responsibility or liability for any errors or inaccuracies that may appear in this manual.

Allen Products are covered under one or more of the following patent numbers:

10,100,537; 9,068,301; 9,068,300; 8,360,680; 7,690,864; 7,114,876B1; 6,857,815B2; 6,582,153

With other Patents Pending.

Printed in U.S.A.

069970Page 2

Other manuals for allen HDX600