9
Stick Reader Power Supply
Power Source Requirements
The RS340 Stick Reader contains a 9.6VDC – 720mAh NiMH rechargeable battery
pack, which serves as its primary power source. Alternately, the RS340 can be
powered:
• From its external AC Adapter/Charger (Via the serial cable),
• Via the power supply cable with alligator clip
*
in conjunction with any external
DC power source (Input Rating 9-12 VDC – 1A).
• By connecting to older model battery packs (PW250) that were used with the
Grey (RS250) Allflex Stick Reader.
Special Notes Regarding Power Requirements
The older RS250 (Grey) stick readers can be powered by connecting directly to some
weigh scale heads (without the battery pack). The RS340 (Yellow) requires a higher
voltage level than most scales produce and hence cannot be used in the same manner,
unless the scale head is externally powered from a car battery, or AC charger.
Otherwise, the yellow reader must have its own charged battery inserted.
Note 1 - The RS340 Stick Reader is designed to operate only with the
Battery Pack provided. The RS340 will not operate with individual
battery cells of either disposable or rechargeable variety.
*
Not proposed for sale in Europe
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN
INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS
To Next Page
Loading...
