SEAT USAGE INSTRUCTIONS
The two black molded seat units can be rotated upwards to allow for patient
loading. Once the patient is in an upward standing position the split seats must
be lowered down to form a complete two-sided seat. Always make sure each
of the two seat components are properly lowered, forming a complete seat
prior to having the patient sit down.
ACCESSORIES
The Alliance
TM
Stand Aid is designed to fully support a seated patient for
transport. For patients requiring some upper body support or additional
security, a safety belt (REF: 1915) may be used. Please see the pictures below
for the use of this belt:
To Next Page
Loading...