To Next PageTo Next Page
Need help?Do you have a question about the ALLIANCE ALLWH3.2kW and is the answer not in the manual?
General| Power | 3.2kW |
|---|---|
| Temperature Range | 30-75°C |
| Brand | Alliance |
| Model | ALLWH3.2kW |
| Water Connection | 1/2 inch BSP |
| Type | Electric |
| Mounting | Wall-mounted |
Lists model names, dimensions, weight, and power supply specifications.
Displays an image of the outdoor unit for visual reference.
Explains the coding system used for product model identification.
Details key attributes like safety, heat exchanger, efficiency, and environmental protection.
Provides detailed technical specifications including power, capacity, compressor, and motor details.
Illustrates how outdoor temperature affects the unit's heating capacity through graphs.
Shows the correlation between outdoor temperature and the unit's energy efficiency ratio (COP) via graphs.
Depicts the relationship between ambient temperature and the water outlet temperature.
Specifies the dimensions for mounting the unit's foundation bolts.
Defines the necessary clearance space around the unit for maintenance and airflow.
Presents detailed electrical connection diagrams for the unit's components.
Displays detailed exploded views of the unit's parts for identification and replacement.
Explains the functions and connections of the Printed Circuit Board (PCB) components.
Lists essential safety warnings and precautions to be followed during installation.
Provides essential information and the correct order for installation procedures.
Lists included accessories and their applications for installation.
Illustrates the overall system layout and component interactions.
Details electrical wiring requirements, specifications, and connection diagrams.
Covers installation space requirements and anchor bolt dimensions for the outdoor unit.
Guides on preparing materials and connecting the water pipes for the unit.
A comprehensive checklist to ensure all installation steps are completed correctly before operation.
Step-by-step guide for charging the water tank and purging air from the system.
Explains the functions and interface of the wired remote controller.
Outlines the sequence of steps for starting the heat pump unit.
Items to check during the trial operation to ensure proper functioning.
Explains various operational aspects like protections, fan adjustment, and defrosting.
Provides detailed explanations of error codes, causes, and solutions for troubleshooting.
Details methods for performing spot checks on the main control board and wire controller.
