EasyManua.ls Logo

ALLIANCE SDENYRGS173TW01 User Manual

ALLIANCE SDENYRGS173TW01
71 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Troubleshooting
Commercial Dryers
Refer to Page 6 for Model Numbers
DRY726C_SVG
Original Instructions
Keep These Instructions for Futur
e Reference.
CAUTION: Read the instructions before using the machine.
(If this machine changes ownership, this manual must accompany machine.)
www.alliancelaundry.com
Part No. D515519R3
December 2018

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the ALLIANCE SDENYRGS173TW01 and is the answer not in the manual?

ALLIANCE SDENYRGS173TW01 Specifications

General IconGeneral
BrandALLIANCE
ModelSDENYRGS173TW01
CategoryDryer
LanguageEnglish

Summary

Safety Information

General Safety Precautions

Covers DANGER, WARNING, CAUTION statements for safe operation and maintenance.

Locating Authorized Service

Information on finding qualified technicians for repairs and warranty service.

Introduction and Identification

Customer Service and Technical Support

Contact information for parts, literature, and technical assistance.

Model Number Identification

Locating and understanding model and serial numbers for product identification.

Dryer Operation Overview

Explanation of how the dryer utilizes heated air to dry laundry loads.

Dryer Troubleshooting

Motor Not Running or Rotating

Diagnosing issues where the dryer motor fails to start or the cylinder doesn't turn.

Heating System Failures

Troubleshooting no heat, insufficient heat, or ignition problems in gas and electric models.

Load Drying Performance

Addressing issues where clothes do not dry properly or are too hot.

Dryer Noises and Vibrations

Identifying causes for excessive chattering, vibrating, humming, or whistling sounds.

Electronic Control Troubleshooting

Understanding Error Codes

List and explanation of error codes displayed on electronic controls.

Display and Communication Issues

Troubleshooting problems like no display, coin errors, and PDA communication failures.

Control System Failures

Diagnosing issues like motor not starting or no heat in electric/gas modes.

Test Procedures

Timer and Motor Component Testing

Procedures for testing timer contacts, drive motor, and motor switch continuity.

Ignition System Diagnostics (Gas)

Steps to test gas burner system components like igniter, sensor, and valve coils.

Electrical Component Checks

Testing thermal fuses, heater assemblies, thermostats, and door switches.

Adjustments and Maintenance

Leveling and Burner Flame Adjustment

Instructions for leveling the dryer and adjusting the burner flame for optimal performance.

Coin Drop Cleaning and Service

Procedures for cleaning and maintaining non-electronic and electronic coin drops.

Related product manuals