ALLIANCE SSGNCAGS113TW01 User Manual

Troubleshooting
Commercial Dryers
Refer to Page 6 for Model Numbers
DRY726C_SVG
Original Instructions
Keep These Instructions for Futur
e Reference.
CAUTION: Read the instructions before using the machine.
(If this machine changes ownership, this manual must accompany machine.)
www.alliancelaundry.com
Part No. D515519R3
December 2018

ALLIANCE SSGNCAGS113TW01 Specifications

General

Brand	ALLIANCE
Model	SSGNCAGS113TW01
Category	Dryer
Language	English

Summary

Safety Information

Locating an Authorized Service Person

Guidance on finding qualified technicians for service and repairs.

Introduction

Customer Service and Contact Information

Details for obtaining literature, parts, and technical assistance.

Model and Serial Number Identification

Location and importance of model and serial numbers for product identification.

How Your Dryer Works

Explanation of the dryer's operational mechanism and airflow.

Dryer Troubleshooting

Dryer Motor Operation Issues

Diagnosing problems when the dryer motor does not run or function correctly.

Cylinder Rotation Problems

Identifying why the dryer motor runs but the cylinder fails to rotate.

Dryer Door Switch Problems

Troubleshooting for dryers operating only with the door ajar.

Heating System Malfunctions

Diagnosing problems with the dryer's heating system failing to ignite or heat.

Gas Burner Ignition and Flame Issues

Resolving issues with burner ignition, repeated cycling, or flame instability.

Drying Performance Issues

Diagnosing why clothes are not drying or are drying too slowly.

Excessive Dryer Noise

Troubleshooting chattering, vibrating, humming, or whistling noises in the dryer.

Electronic Control Troubleshooting

Understanding Error Codes

Explanation of error codes displayed by the electronic control system.

Coin and Payment System Errors

Troubleshooting coins being ignored or payment system errors.

PDA and Communication Faults

Diagnosing issues where the PDA fails to communicate with the dryer control.

Display and Power Issues

Troubleshooting a blank display or no power to the control unit.

Door Sensor and Motor Start Problems

Diagnosing door sensor faults and motor start failures.

Electric and Gas Heating Control Issues

Troubleshooting no heat conditions in electric and gas dryer models.

Coin Drop Troubleshooting

Non-Electronic Coin Drop Issues

Troubleshooting coin entry and registration for non-electronic coin drops.

Electronic Coin Drop Maintenance

Procedures for cleaning and maintaining electronic coin drops.

Test Procedures

Timer and Motor Switch Testing

Procedures for testing timer contacts, motor, and motor switch continuity.

Drive Motor and Windings Testing

Steps for testing drive motor resistance and windings.

Gas Burner System Component Testing

Testing gas burner system components like coils, sensors, and igniters.

Electric Component Testing

Testing thermal fuses, heater assembly, thermostats, and door switches.

Thermistor Testing

Procedure for testing the thermistor's resistance.

Internal Wiring Schematics

Wiring diagrams for the dryer motor switch for reference.

Adjustments

Leveling Legs and Dryer Stability

Instructions for properly leveling the dryer for stable operation.

Burner Flame Adjustment

Procedure for adjusting the burner flame for optimal performance.

Coin Drop Cleaning and Maintenance

Steps for cleaning non-electronic and electronic coin drop mechanisms.