To Next PageTo Next Page
Need help?Do you have a question about the ALLIANCE STGNYASP115TW01 and is the answer not in the manual?
General| Brand | Alliance |
|---|---|
| Model | STGNYASP115TW01 |
| Category | Dryer |
| Type | Electric |
| Color | White |
| Voltage | 120V |
| Amperage | 15A |
| Depth | 28 inches |
| Drum Capacity | 7.0 cu. ft. |
| Control Type | Electronic |
| Energy Source | Electric |
| Venting Type | Vented |
| Width | 26.875 inches |
Outlines DANGER, WARNING, CAUTION statements and important notes for safe operation.
Guidance on finding qualified technicians for service and repairs.
Information on contacting customer service and identifying model numbers and serial plates.
Explanation of the dryer's operational process and component functions.
Diagnosing issues when the dryer motor fails to start or operate.
Troubleshooting why a dryer stops mid-cycle or after initial loads, including burning smells.
Steps to diagnose a dryer where the motor operates but the cylinder remains stationary.
Troubleshooting a dryer motor that fails to shut off after the cycle completes.
Diagnosing dryer operation that occurs exclusively when the door is open.
Resolving issues with the dryer's heating assembly or burner ignition system.
Troubleshooting steps for gas dryers where the igniter glows but the burner fails to ignite.
Troubleshooting premature shut-off of the dryer's heating components or burner.
Addressing problems where clothes are not drying adequately or are excessively hot.
Diagnosing and fixing excessive chattering, vibrating, humming, or whistling noises in the dryer.
Explanation of various error codes displayed on the electronic control panel.
Troubleshooting coin drop failures and PDA communication errors.
Diagnosing issues like no display, door open errors, or motor will not start.
Specific troubleshooting steps for electric and gas dryers experiencing no heat.
Steps for troubleshooting coin drops that do not use electronic registration.
Instructions for cleaning and servicing electronic coin drops, including spring replacement.
Procedures for testing timer contacts, drive motor, and motor switches for proper function.
Testing gas burner ignition components, sensors, and valves.
Testing methods for thermal fuses, heater assemblies, thermostats, and door switches.
Instructions on leveling the dryer and adjusting the gas burner flame for optimal performance.
Detailed steps for cleaning coin drop mechanisms, both electronic and non-electronic.
