To Next PageTo Next Page
Need help?Do you have a question about the ALLIANCE STENXASP433AW01 and is the answer not in the manual?
General| Brand | Alliance |
|---|---|
| Model | STENXASP433AW01 |
| Voltage | 208-240V |
| Amperage | 30A |
| Heating Method | Electric |
| Control Type | Mechanical |
| Reversing Action | No |
| Door Swing | Reversible |
| Exhaust Size | 4 inches |
| Appliance Category | Commercial |
| Phase | 1 |
| Width | 26.875 in |
| Height | 43 inches |
Troubleshooting steps for a dryer motor that fails to start or operate.
Diagnosing issues like the dryer stopping during a cycle or producing a burning smell.
Steps to resolve the problem where the dryer motor runs but the cylinder does not turn.
Troubleshooting steps for when the dryer motor fails to shut off as expected.
Diagnosing why the dryer runs exclusively when the door is in the open position.
Procedures for when the dryer's heating assembly or gas burner fails to ignite or heat.
Troubleshooting specific igniter problems, such as not glowing or failing to ignite the burner.
Diagnosing and fixing gas burner issues where ignition occurs repeatedly and then stops.
