Need help?Do you have a question about the Allied Pumps Logikos and is the answer not in the manual?
Sources of liquid level information: Multipoint, Individual, Analogue, Pressure, 3 Level Probe.
Explains input interpretation and visual display methods for liquid levels.
Strategies for sensor failures and interpreting data with potential errors.
Configuration of digital inputs for Individual and 3 Level Probe modes.
Defines parameters and algorithms for pump operation based on levels.
Details manual pump control, low-level algorithms, and constant pressure control.
Explains pump LEDs, maximum off time, and duty/timeout settings.
Configuration of external inputs and AUX relay outputs.
Lists alarm causes, types (Critical, Local), and sources.
Explains alarm resetting, muting, and auto-reset features.
Describes how a high-level alarm can override the system pause function.
Accrual of running hours, pump starts, and scheduling of next service.
Explains the PLC output capabilities for transmitting liquid level data.
Guidelines for serial port interfacing, including compatibility and cable distance.
Explains the general format and representation of Modbus registers.
Lists and describes stored parameters, including control flags and digital active flags.
Details Digital Active Flags, Digital Polarity Flags, and Alarm Critical Flags.
Covers alarm enable flags, excess run period, and various setpoint parameters.
Lists history records, pump timers, and diagnostic information.
Covers software version, timers, and system status flags like Pump Flags and Level Flags.
Describes Level Flags, current level readings, and alarm present status.
Explains how to update stored parameter registers using the Modbus interface.
Outlines initial commissioning steps: loading defaults and resetting totals.
Details advanced menu entry, structure, and configuration options.
Covers user-editable settings and model type selection.
Details pump, power, and alarm status screens and information.
Explains entering special modes like Advanced Setup and Diagnostic via button presses.
Details warranty terms, conditions, coverage, and service responsibilities.
General| Category | Control Systems |
|---|---|
| Manufacturer | Allied Pumps |
| Application | Pump control and monitoring |
| Protection Rating | IP65 |
| Communication Protocol | Modbus RTU |
| Input Voltage | 100-240 VAC |
| Operating Temperature | -10°C to +55°C |
| Display | LCD |
| Analog Inputs | 2 |
| Digital Inputs | 4 |
To Next Page