16
Maximum protrusion
If the lens exceeds maximum protrusion, camera or lens can be damaged. Use
lenses with a maximum protrusion within camera specifications.
For S-Mount lenses, read Mounting the lens on page 19 to avoid damage to the
sensor, camera electronics, and lens.
Handling bare board cameras
Bare board cameras are an electronic assembly without a protective housing.
Therefore, they can easily be damaged.
• Handle bare board cameras with extreme care.
• Read the user guide for details.
• Consult with Allied Vision support for your individual application.
Mount
Maximum
protrusion
C-Mount 13.6 mm
CS-Mount 8.6 mm
S-Mount 11.0 mm
*Color models only
C-Mount and CS-Mount S-Mount
Maximum
protrusion
Filter
*
Lens mount
front flange
Sensor
Maximum
protrusion
Electronics
Lens mount
front flange
Sensor
To Next Page
Loading...
