Allis-Chalmers 900 Series - TO OUR CUSTOMER - USERS RESPONSIBILITY; USERS RESPONSIBILITY

TO OUR CUSTOMER - USER'S RESPONSIBILITY
TO OUR CUSTOMER
The following pages and illustrations are printed to help supply you with the knowledge to
better operate and service your new ALLIS-CHALMERS equipment.
We are proud to have you as a customer and feel you will be proud to be an ALLIS-
CHALMERS owner.
Any piece of equipment needs, and must have a certain amount of service and maintenance
to keep it in top running condition. We have attempted to cover all the adjustments re¬
quired to fit most conditions; however, there may be times when special care must be
taken to fit a condition.
Study this operator's manual carefully and become acquainted with all the adjustments and
operating procedures before attempting to operate your new equipment. Remember, it is
a machine and has been designed and tested to do an efficient job in most operating condi¬
tions and will perform in relation to the services it receives.
If special attention is required for some conditions, ask your ALLIS-CHALMERS dealer;
his Parts and Service Organization will be glad to help and answer any questions on oper¬
ation and service of your new machine.
A ATTENTION! BECOME ALERT!
YOUR SAFETY IS INVOLVED! H
This symbol is used to call your attention to safety precautions that should be followed by
the operator to avoid accident’s. When you see this symbol - Heed Its Warning.
USER'S RESPONSIBILITY
It is the responsibility of the user to read the Operator's Manual and understand the safe and correct operating proce¬
dures as- pertains to the operation of the product, and to lubricate and maintain the product according to the main¬
tenance schedule in the Operator's Manual.
The user is responsible for inspecting his machine, and for having parts repaired or replaced when continued use of
the product would cause damage or excessive wear to other parts. It is the user's responsibility to deliver his machine
to an Allis-Chalmers dealer for service or replacement of defective parts which are covered by the standard warranty.
When requesting warranty service, you must present your copy of delivery record.
The user will advise the Dealer when operation of the unit will be started so dealer representative can be on hand to
make necessary adjustments and help you get started properly.
If the Dealer is requested by the Customer to travel to another location, or haul the machine to his shop for the pur¬
pose of performing a warranty obligation or free inspection, it would be for the Customer's convenience, and the cost
for such trips is to be paid for by the Customer. Any arrangement whereby the Dealer agrees to absorb all or a part of
the cost of these trips is to be made between the Dealer and the Customer and is to be considered a courtesy to the
Customer.
Allis-Chalmers does not allow credit for the cost of travel time, mileage, or hauling as a warranty allowance.
WARRANTY . . . Your Allis-Chalmers warranty for any new equipment listed appears on your copy of the Purchase
Order signed by you and your selling dealer. You will be required to pay any premium for overtime labor requested
by you, any charge for making service calls and for transporting the equipment to and from the place where warranty
work is performed. Normal maintenance service and repair work not covered by the warranty during the warranty
period and all service after the warranty period will be charged for at the dealer's regular rates and prices.