2
Foreword
The ALL-MC116 is a VDSL2 CO/CPE bridge with 2 x 10/100/1000base-T LAN ports solution that's built for data transmission
via 10/100/1000BASE-T Ethernet cable (UTP), line port by single twisted pair and 1.25G SFP slot. ALL-MC116 supports
CO/CPE mode selectable and bands profile selectable via DIP switch on rear panel of ALL-MC116. ALL-MC116 LAN port
support auto-negotiation & auto-MDIX to set up the most stable & fastest connection between ALL-MC116 and the devices
that connected to it on Ethernet side.
ALL-MC116 is specifically designed for FTTdp/FTTC network, and it supports both symmetrical and asymmetrical
transmission at up to 160/160Mbps and 5/1Mbps at 3000 meters, which is a perfect solution to extend LAN to buildings,
hotels, hospitals or any location outside of the 10/100/1000Base-T(Ethernet) or fiber optic.
Attention:
Be sure to read this manual carefully before using this product. Especially Legal Disclaimer, Statement
of Conditions and Safety Warnings.
Caution:
The ALL-MC116 is for indoor applications only. This product does not have waterproof protection. Do not use in harsh
environments (Over temperature range: 0°C ~ 50°C (32°F ~ 122°F)).
To Next Page
Loading...