Allora 2
28
You can change between word prediction, sentence prediction and no prediction
with the key combination .
8.1.1 How to save messages
1. Add messages to the list of sentence predictions
First press the key to clear all messages. Then write your message and
press the key combination . You will hear a short sound to
acknowledge that the sentence has been added to the sentence prediction list.
Use the key combination to delete the sentence, that
is displayed in the prediction area, from the sentence predition list.
2. Save messages ‘under a key’
First press the key to clear all messages. Then write your message and
press the Message key twice, followed by a character or a figure. Confirm
with if you want the message to be linked with the chosen character of
figure. Press to ignore it.
You can also use the following key combinations to save messages:
• Fn + figure or character,
• Shift + figure or character,
• Fn + Shift + figure or character.
To recall a message, press the ‘message’ key first and then press a
figure or a letter. The message that is associated with this key will then be
displayed on the screen. You can add or change something if you want, and then
you press the 'validation' key to have it pronounced.
If you wish to have the message immediately pronounced after recalling it, you
have to activate the parameter ’read stored message’ (see “Read Stored msg”
on page 53).
This also applies to the key combinations:
• message key + Fn + figure or character,
• message key + Shift + figure or character,
• message key + Fn + Shift + figure or character.
To Next Page
Loading...