Getting Started
The Alloy SmartHome Hub works best if installed
in a central location to where your smart devices
will be connected. Maintain a minimum separation
distance of 7.6 inches (20 cm) between this equipment
and any person or other devices. To install:
1. Mount a 5.5 inch (14 cm) DIN rail to a wall in the desired location and slide the hub onto it.
2. Connect the supplied power adapter.
3. When the status LED turns solid green, the hub is available for use.
Important Safety Instructions
• Read, follow, and keep these instructions.
• Heed all warnings.
• Do not use this product near water or expose the product to dripping or
splashing of any water or liquid.
• Clean only with a dry cloth.
• Do not install near any heat sources such as radiators, heat registers, stoves or
other apparatus (including amplifiers) that produce heat.
• Only use attachments and accessories specified by the manufacturer.
To Next Page
Need help?
General
