If this controller is the primary controller for your network, resetting it will result in the nodes in
your network being orphaned and it will be necessary after the reset to exclude and re-include
all of the nodes in the network. If this controller is being used as a secondary controller in the
network, use this procedure to reset this controller only in the event that the network primary
controller is missing or otherwise inoperable.
Associations
The Hub supports the Association Group 1 (Lifeline).
Notifications emitted by devices in the Z-Wave network controlled by the Hub are propagated to
the Alloy SmartHome Hub Web application, as well as to external applications connected via the
Hub’s secure MQTT API.
The currently supported types of notifications are:
● Smoke Alarm
● Water Alarm
● Access Control Event
● Home Security Event
● Siren Event
● Power Management Alarm
Attribute values shown for each device are updated upon receiving a notification for that device.
Any attribute value updated from the last received notification is highlighted in yellow.
© 2020 Alloy SmartHome LLC All Rights Reserved 15
To Next Page
Loading...
Need help?
General
