Charge mobile phones with mainstream QI
standard wireless charging through wireless
charging protocol
Attachment: Reference for Energy Supply Time of
Common Electrical Appliances
3.After each output is completed, press the control button to
exit the output mode to save energy, and then remove the
electrical appliances. (Especially after completing the AC output
mode, remember to short press the control key to exit the
output mode.)
Wireless charging output: 5V/1A
Effective distance for wireless power transmission: 5-8 mm
(The thickness of the phone protective case should not exceed
5mm, and the material of the phone case should not contain
any interfering substances such as metals or metal alloys.)
Radio conversion rate: ≥ 72%
Charging frequency: 110-205 KHz
Compatibility: Supports mainstream QI standard wireless
charging models, models that do not support wireless charging
can be used in conjunction with wireless charging receivers.
Before starting charging, please ensure that you have
placed your phone in the center of the wireless charging area.
During the charging process, it is normal for the surface area of
the wireless charging to heat up.
DC power supply: 41 hours 4.3 hours 6.4 hours 23 hours
AC power supply: 12.7 hours 3.4 hours 4.6 hours 10.1 hours
To power loads with different rated powers, you may notice:
If the load power is high (such as a small refrigerator), the battery
consumption is fast, and the actual total energy consumption is
close to the nominal battery energy. However, when you replace
a smaller power consumer, the actual total energy consumption is
far from the nominal battery energy (and the battery life is less
than the theoretical time). The main reason is that the machine
has self consumption power, and the power size is close to the
consumer power.
To Next Page
Loading...