• Check fuel and oil levels
• Check "START-STOP" switch
• Check throttle and choke positions
• Ensure spark plug lead is connected
• Refer Engine Manual
• Unusual noise and/or vibrations
• Check for loose blade/s –tighten blades
• Check for obstructions under mower or in
catcher –clear obstruction
• Engine running, blade not rotating
• shut unit off and take directly to dealer for
repair.
• Mower clogging with material
• Grass to damp to mulch correctly –Lift
height adjuster or allow grass to dry first
• Mowing too much grass at once
Stop engine and wait for all moving parts to come to a complete stop before
attempting any of the above checks.
Do not tip machine for maintenance with the engine running and/or with oil in the
engine. Drain engine of oil first if the machine must be tipped. This will ensure
that oil does not run into the air filter, muffler or carburettor.
Should difficulties persist after these recommendations have been attempted, please
refer to your local authorised Allpower Servicing Dealer.
P a g e | 9
To Next Page
Loading...
Need help?
General