3
Operating Instructions and Parts Manual
High Pressure Abrasive Blast Cabinet
General Safety Information
Any blast cabinet will produce a powerful flow of
abrasive particles. To avoid personal injury and
property damage, study this manual thoroughly before
assembling, operating or servicing this blast cabinet.
.
1. During operation, do not expose the hands or
skin directly in the line of the blast nozzle.
2. Ensure all components seal properly after
assembly.
3. Do not exceed the maximum operating pressure
of the blasting equipment
4. Disconnect the cabinet from the air supply before
changing accessories or attempting to install,
service, relocate or perform any maintenance.
5. Check hoses and air lines for weak or worn
condition before each use. Make sure all the
connections are secure before use.
6. Do not point the abrasive blaster nozzle at
anyone or objects.
7. Before installing the machine, consider the
availability and proximity of the required power
supply circuit. If an existing circuit does not meet
the requirements for this machine, a new circuit
must be installed. To minimize the risk of
electrocution, fire, or equipment damage,
installation work and electrical wiring must be
done by an electrician or qualified service
personnel in accordance with all applicable
codes and standards.
To Next Page
Loading...