What to do if there is no sound or picture on my Alma Receiver?
If there's no sound or picture, the satellite dish might not be correctly aligned with the satellite, resulting in a weak or absent signal. To resolve this, try the following: * Adjust the dish. * Check the signal level in the Antenna Setup menu. * Inspect the cable connections, LNB, and other equipment between the LNB and the receiver.
Why is my Alma Receiver showing a bad picture or blocking error?
A bad picture or blocking error can occur for several reasons: * The satellite dish isn't pointed correctly. * The signal is too strong. * The satellite dish is too small. * The LNB noise factor is too high. * The LNB is faulty. Here are some suggested solutions: 1. Adjust the dish. 2. Connect a signal attenuator to the LNB input. 3. Change to a larger dish. 4. Change to an LNB with a lower noise factor. 5. Change the LNB.
How to fix an Alma Receiver remote (RCU) that is not working?
To Next Page
General