Alogic USB-C Dock Wave User Manual

Making the Connection
A) Docking Station
1. Connect the USB-C Dock Wave to the Thunderbolt 3/ USB-C port (DP Alt mode enabled)
on your laptop. The Plug and Play design allow you to use the dock without installing any
drivers or software.
2. Connect the dock to an external 4K HDMI display with a compatible cable¹.
3. Charging an external device via the USB-A port requires a compatible cable¹.
4. Charge your laptop via the USB-C port with a compatible USB-C cable and USB-C
charger¹ (Should have minimum 45W power output)
5. Data transfer is available via any of the following connections: 2 x USB-A, SD and micro
SD card readers.
¹compatible cables not included.
B) Wireless power bank
1. Before using the Dock Wave’s wireless charging capabilities, fully charge the device by
plugging it into a USB-C compatible wall charger². All four white LED lights will appear
once the dock is fully charged.
2. Press the power button for 3 seconds to turn the power bank on.
3. Press the power button twice to switch the wireless charging on.
4. Place your Qi-enabled device on the wireless charging pad. Ensure that the centre of
the device is aligned with the Qi logo. The blue LED light will appear to breathe slowly,
indicating that your device is charging.
5. In the event that a foreign object is detected or if your device is emitting high
temperatures the LED indicator will flash red.
6. Battery capacity is indicated by the four LED lights, as 25% increments.
7. Turn o the power bank by pressing the power button for 3 seconds.
²wall charger not included.

Alogic USB-C Dock Wave Specifications

General

Weight	120g
Ports	HDMI, Ethernet, 3.5mm Audio Jack
HDMI Resolution	4K @ 60Hz
DisplayPort Resolution	4K @ 60Hz
Material	Aluminum
USB-C Ports	1 x USB-C (for host connection), 1 x USB-C PD
Compatibility	USB-C enabled devices including MacBook, Windows laptops, and other USB-C enabled devices

Summary

Making the Connection

Docking Station Setup

Connects USB-C Dock Wave to laptop, external display, and external devices. Supports charging.

Wireless Power Bank Operation

Charges devices wirelessly or via USB-C. Includes LED indicators for status and battery.

Product Introduction

Product Specifications

Key Features

Package Contents

Physical Layout Overview

Qi Wireless Charging Port

Location for wireless charging of Qi-enabled devices.

USB-C Power Delivery Port

Provides power input and output up to 60W.

USB-A 3.0 Ports

Two USB-A ports for data transfer and charging.

SD and Micro SD Card Reader

Slots for reading SD and micro SD memory cards.

4K HDMI Port

Connects to external 4K HDMI displays.

LED Indicators

Visual indicators for device status and battery.

FCC Warning and Compliance