EasyManua.ls Logo

ALPATEC AB 01 - SPECIFICATIONS; FILLING

ALPATEC AB 01
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SPECIFICATIONS
Model AB 01
Voltage AC 24 V
Maximum Power 9 W
Steam flow 25 ml/h
FILLING
USE ONLY CLEAR AND CLEAN WATER
12
1. Take out the removable water tank
2. Fill the internal water tank with tap water
(neither distilled water, or purified water).
Do not exceed the water level line.
3. Unscrew knob from removable water tank and fill it with tap
water.
Close the knob and replace the tank.
Tight it downwards to fix it.
Wipe off the water on the water tank or on the appliance with
a damp cloth before connecting.
notice_AB01:notice DH_25EC 29/09/08 15:15 Page 12