1. Cleaning the exterior of the bidet seat
Pull out the nozzle softly and use a smooth
cloth/sponge or soft toothbrush to clean the
nozzle
Close the cover. Push and hold the release button
and pull the bidet seat forward as shown.
(If the water flow is less than usual)
Turn off water supply, remove the bidet supply
hose and clean the filter screen.
4. Remove the main body
Use a smooth sponge/cloth with water and/or
mild soap to clean the product. Do not use the
following types of cleaning products: hydrogen
chloride detergent, paint thinner,benzene abrasive
paper,polishing agent, bleach, or chlorine.
Chlorine
Abrasive
paper
Paint thinner
Pull bidet seat forward
while pressing the
release button
2 Clean the regulator o-ring
1
Regulator
Cleaning and Maintenance
2. Cleaning the spray nozzles
Close
cover
first
3. Clean the filter and regulator
To Next Page
Loading...