Do you have a question about the Alpha ESS SMILE-BAT-G3-10.1P and is the answer not in the manual?
Contact details for Alpha ESS offices in Germany, China, and Australia.
Legal statement regarding the copyright of the manual.
Details on the manual's version and release date.
Overview of the SMILE-BAT-G3-10.1P battery pack's capabilities.
Technical details and parameters of the battery system.
Instructions on maintaining and using the installation manual.
Qualifications and knowledge needed for system operators.
Importance of warning signs and their proper maintenance.
Guidelines for placing warning signs to prevent accidents.
Requirements for electrical parameter testing equipment.
Precautions against moisture damage to the system.
Safety procedures for operating the system after a power outage.
Information regarding the battery's hazardous materials and safety.
Critical safety precautions for handling and operating the battery system.
List of components included with the battery system.
Conditions under which AlphaESS disclaims liability for product damage.
Guidelines for selecting an appropriate installation location.
General requirements for indoor and outdoor installation sites.
Forbidden locations and clearance requirements for installation.
Fire protection requirements for installations near habitable rooms.
Step-by-step guide for physically installing the battery system.
Instructions for connecting the battery system to other components.
Importance and procedure for grounding the battery system.
Steps for connecting power and communication cables to the inverter.
Guide for connecting additional battery modules for expansion.
How to turn the battery system on and off correctly.
Explanation of the LED ring indicators and their meaning.
List of protection codes and their corresponding descriptions.
Common error codes and recommended troubleshooting steps.
Procedures and equipment for handling fire emergencies involving the battery.
Actions to take in case of electrolyte leakage from the battery.
Safety measures for batteries exposed to water.
Procedures for safely handling and returning damaged batteries.
Details on what is covered by the product warranty.
Scheduled maintenance tasks and frequency.
Periodic checks of the operating environment for optimal performance.
Guidelines for cleaning the battery system and its surroundings.
Inspection of cables, terminals, and equipment for wear or damage.
Important notes and recommendations for maintenance personnel.
Comprehensive technical data and specifications for the SMILE-G3-BAT-10.1P.
| Model | SMILE-BAT-G3-10.1P |
|---|---|
| Nominal Voltage | 51.2 V |
| Warranty | 10 years |
| Scalability | Up to 6 units in parallel |
| Category | Battery |
| Battery Type | Lithium Iron Phosphate (LiFePO4) |
| Usable Energy | 10.1 kWh |
| Cycle Life | 6000 cycles at 80% DoD |
| Operating Temperature | -10°C to 50°C |
| Communication Interface | CAN |