Need help?Do you have a question about the Alpha Technologies iQ Charger Wi-Fi and is the answer not in the manual?
General| Connectivity | Wi-Fi |
|---|---|
| Type | Battery Charger |
| Output Voltage | 12V/24V DC |
| Compatible Battery Types | Flooded, AGM, Gel, Lithium |
| Temperature Compensation | Yes |
| Protection Features | Reverse Polarity, Over Voltage, Over Current, Over Temperature, Short Circuit |
Details the camera lens, protective film, and USB port on the front side.
Details the Micro SD card slot, sticker panel, and reset button on the back.
Ensure the camera's microSD slot is empty before proceeding with setup.
Avoid connecting devices for charging to the USB port to prevent overheating.
Plug the camera into a wall or powerbank and wait for it to load. It requires continuous power.
Place the camera as close as possible to the Wi-Fi router for initial setup.
Navigate phone settings to view available Wi-Fi networks and find 'SmartLife-XXXX'.
Locate the 'SmartLife-XXXX' network for camera connection. Reset camera if not visible.
Note: Do not connect your phone to the 'SmartLife-XXXX' network during setup.
Download and install either the Tuya Smart app or the Smart Life app from your app store.
The setup steps are identical for both the Tuya Smart and Smart Life applications.
Create a new account within the app or sign in using existing Apple or Google accounts.
Tap 'Add Device' or the '+' icon to begin adding the camera to the app.
The app requires location access to find your Wi-Fi network; this can be disabled post-setup.
Navigate to 'Camera & Lock' and then select 'Smart Camera (Wi-Fi)' in the app.
Tap 'QR Code', select 'Wi-Fi Mode', and proceed by tapping 'Next step'.
Alternatively, tap 'AP Mode' for a different connection method.
The camera has no front indicators or prompt tones. Ignore app messages about them.
Choose your 2.4G Wi-Fi network and enter the password, then tap 'Next'.
The camera operates exclusively on 2.4G Wi-Fi. Enable 2.4G on your router if using 5G.
Refer to alpha-technics.com/5G for additional assistance with 5GHz Wi-Fi configurations.
Make hidden networks visible for connection, then re-hide them. The camera requires a secure, password-protected network.
Utilize portable Wi-Fi hotspots to use the camera anywhere without a router.
Tap 'Go to connect' to display your phone's Wi-Fi network list for device hotspot connection.
Select the 'SmartLife-XXXX' network. On iPhone, wait for the check icon; on Android, confirm 'Connected, no internet'.
If prompted to 'Reconnect', tap 'Confirm hotspot connection, next' below the button.
Wait 2-4 minutes for the camera to be added successfully, involving scanning, cloud registration, and initialization.
Rename the camera using the edit icon and tap 'Done'. Follow troubleshooting steps if errors occur.
If errors occur, reset the camera, move it closer to the router, and verify the Wi-Fi password.
Use Wi-Fi extenders or extension cords for optimal camera placement and signal strength.
Utilize app zoom features and disguise the charger's power connection for advanced use.
Record photos and videos directly to your phone if no microSD card is available.
Tap 'Screenshot' below the camera feed to capture a still image.
Tap 'Record' to start video recording; it stops when the app is closed or hidden.
Navigate to 'Photo album' in the app to view recorded videos and manage them.
Use the delete icon to remove videos or the share icon to save them to your phone's album.
With a microSD card, the camera records continuously even when the app is closed.
Unplug the camera, insert the microSD card, then plug it back in and wait 2-3 minutes.
Open the app, tap the camera, and then tap the edit icon on the top right for settings.
Tap 'Storage settings' to confirm microSD card capacity. Format the card if prompted.
Navigate to Settings > Recording Settings and toggle 'Local Recording' on.
Supports 8GB to 512GB microSD cards. Recommended brands: Sandisk, Sony UHS-I.
From the camera view, tap 'Playback' to access recorded video files.
Tap the calendar icon to select a specific date for viewing recorded footage.
Swipe the timeline to pinpoint and choose the exact time of the recorded event.
Take screenshots during playback to capture important movements or events.
Turn on motion detection alerts to be immediately informed of any activity.
Tap your camera, then tap the edit icon on the top right to access its settings.
Navigate to 'Detection Alarm Settings' and enable the 'Motion Detection Alarm'.
Ensure that notifications are enabled in your phone's general settings for alerts to function.
Open the Home screen of the app to view all connected devices.
Tap 'Me' at the bottom, then tap the 'Message center' to view alarm logs.
Tap individual alarm messages to see details of detected movements, including timestamps and locations.
Tap 'View' on an alarm notification to see live footage or previously recorded video.
If recording to microSD, watch the video from the time the event was triggered.
Tap your camera, then the edit icon, and navigate to Recording Settings.
Go to Recording Settings and select 'Recording Mode'.
Choose 'Event Recording' to only record detected movements, saving disk space and time.
Open the Home screen of the app to view all connected devices.
Tap the 'Smart' icon on the bottom navigation bar.
Tap 'View multiple camera videos in one screen' to see up to 16 cameras simultaneously.
To change location or Wi-Fi, reset the camera and set it up again with the new network.
Open camera menu, tap edit icon, scroll down, and tap 'Remove Device' to start reconfiguration.
Tap 'Confirm' to remove the camera and reset it to default settings. Wait 4-6 minutes to reconfigure.
If previous Wi-Fi is inaccessible, manually reset the camera (see Page 39).
Unplug the camera, remove the microSD card, and connect it to a power source.
Keep the camera connected to power for 3-4 minutes during the reset procedure.
Press and hold the reset button (between L and M switch) until lights turn off. Use a paperclip or pin.
Plug the camera into a wall after the reset. Wait 3-5 minutes before setting it up again.
Eject the microSD card from the camera and connect it to your PC/Mac using an adapter.
Install K-lite Codec Pack and Media Player Classic for PC. Open video files with it.
Install MKPlayer for Mac. Change file type to .mp4 and open with MKPlayer.
Install the app on a second device and use the same login credentials for access.
The camera network ('SmartLife-XXXX') is hidden after setup and not visible in Wi-Fi lists.
The camera does not record sound due to Amazon policy restrictions.
If offline, unplug and replug the camera. Move it closer to the Wi-Fi router.
If 'SmartLife' network is not visible, reset the camera, move it closer to the router, and reconfigure.
Move camera closer to router or use a range extender. Avoid using it for charging to prevent overheating.
Warranty registration period expires after 7 days. Visit www.alpha-technics.com/warranty.
To Next Page