PIONEER REMOTE INSTRUCTIONS p1
2
3
4
5
6
7
8
08
M
16
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16
184 0
Su
184 0
2
3
4
Su
K1
K2
K3
K1
K2
K3
K1
K2
K3
K1
K2
K3
K1
K2
K3
UP
STOP
DOWN
LIGHT
UP
STOP
DOWN
LIGHT
UP
STOP
DOWN
UP
STOP
DOWN
UP
STOP
DOWN
UP
STOP
DOWN
UP
STOP
DOWN
Channel
Switc Buttonh
learnin uttong b
• Currency 2mA:≤1
• Code olling Code: R
• Frequency 33.92MHz: 4
• Powe V Model: CR2430r: 3
• Protectio ndex: I 20n I P
• Working Temperature: -10 to +60 LCD remote)℃℃(
• Working Temperature: -20 to +60℃℃(Non CD remote)- L
Pres p and Down buttons simultaneously once,then short press Stop button once.s U
0.42 remotechannel
Shor p esstr the Channel Switch
button to select a channel
(from 1 to 4), once selected,
the corresponding light will shine.
Press UP and DOWN buttons
simultaneously once.
Then short press the Stop button,now
the code of the selected channellearning
is channels to learn codesuccessful. therO
in the way.same
The figure on upper left corner of the showsscreen
the current press K1/K3 to choosechannel. Short
any from 1 to 8.channel
Choose one then press UP and DOWNchannel,
buttons once.simultaneously
Then short press the STOP once, now thebutton
code learning of current channel is successful.
0. L3 CD multi-channel remote (take RE103-8C as an example)
Instruction guide for RE101, RE102, RE103 series remotes
1. PRODUCT APPEARANCE
2. TECHNICAL DATA
3. CODE LEARNING
ALPHA SUPPORT PHONE (909) 307-2320
RE101 single channel RE102 4 channel RE103 4C 4 channel RE103 8C 8 channel
RE10 channel RE10 RE103 4 4 channel timer3 16C 16 3 1T single channel timer T
01. single channel remote
To Next Page
Need help?
General
