www.alphasonik.com
Safety Overview
Before connecting the speaker, make sure the system is off, and the controls are on
the minimum level. If not set to minimum setting, the probability of damaging internal
components is extremely likely.
CAUTION:
Do not place the microphone against the speaker, it can cause feedback echo and it
will damage the system.
— Do not overheat the system
— Do not expose to direct heat for long periods of time
— Verify that the voltage switch is set to the corresponding voltage in your
country. (110 Volts default setting)
— When not in use, unplug the power cord, or switch off
— Use appropriate mounting brackets to avoid bodily harm
— Protect from any water or liquids
— Never try to repair unit yourself
— Keep out of reach of children, as there is high voltage and could
cause injuries.
9
To Next Page
Loading...
