7
INSTALLATION REQUIREMENTS
Bench Seat
Front Panel (with Glass Door)
+ Door Handle Assembly
1. Your sauna can be plugged into a regular house socket but will draw close to 10A.
Try to plug into a socket on an electrical circuit that is not shared with other large
appliances.
2. Install the sauna on a hard, level surface.
3. If the oor surface is damp or cold, install a form of insulation between the bottom of
the sauna and the ground such as rubber matting.
4. Do not store ammable objects or chemical substances near the sauna.
5. The sauna must be placed indoors and in a dry area. Excess moisture will cause
damage to the interior and exterior of the sauna.
6. We recommend 2 persons to install the sauna.
To Next Page
Loading...