Alpine 1310R - Page 23

| OPERATION
Direct Disc Access
1.
Press
one
of
the
Direct
Disc
Access
buttons
(®
—
@)
to
select
from
discs
1
—
6.
The
disc and
track
numbers
will
appear
in the
display.
2. Press the UP © or DN © switch for musical track selection.
Fast Forward/Fast Backward
The fast forward/fast backward feature works in the play mode only.
Press either the UP © or the DN @ switch and hold it down for more than 1 second.
To move the pickup forward rapidly, hold down the UP switch ©.
To move the pickup backward rapidly, hold down the DN switch @.
Release the button when you get to the desired position on the disc.
When
the
pickup
reaches
the
end
of
the
disc,
it
will
begin
playback
from
the
beginning
of
the
first
track
on
the
next
disc.
Si Orth Ss
Repeat (One/All)
This feature allows you to continuously repeat a single track or one entire disc.
To Repeat a Single Track
1. Locate the music track of your choice using the UP ® or DN © switch.
2. Press the REPEAT button @.
The REPEAT indicator @ will illuminate.
The music track will be played back repeatedly.
3. To stop repeat play, press the REPEAT button ® twice.
To Repeat an Entire Disc
1. While playing a disc, press the REPEAT button ® until the ALL indicator ® will
illuminate.
2. The disc will be played back repeatedly.
3. To stop repeat play, press the REPEAT button © once. The indicator illumination will
be off.
Disc Scan
Press the SCAN button (9 and the unit will playback the first 10 seconds of each track
in succession. This function is useful in searching ahead on a disc for a specific selection.
Pressing the SCAN button “ a second time deactivates the function.
M.1.X. (Random Play)
Press the M.I.X. button @ while the unit is in the play or pause mode. Musical tracks
on the selected disc will be played back in a random sequence generated by the micro-
processor. After all the tracks on the disc have been played back once, the player will
begin a new random sequence.
23