Alpine 7915M - Page 10

Eject Auto-Lock
Be
sure
to
eject
the
compact
disc
from
the
player
before
removing
the
unit
from
the
dash.
It
is
necessary
to
remove
the
CD
in
order
for
the
locking
mechanism
to
be
activated.
Failure
to
do
this
may
cause
damage
to
the
compact
disc
or
the
laser
mechanism.
Thermal Protection Circuit
Be
sure
the
temperature
inside
the
vehicle
is
between
+60°C
(+140°F)
and
—10°C
(+14°F)
before
attempting
to
play
a
disc.
When
the
temperature
is
over
+60°C
(+140°F),
the
protection
circuit
functions
to
stop
the
CD
player,
and
“HOT”
is
displayed.
Moisture Condensation
You
may
notice
the
playback
sound
wavering.
When
this
happens,
remove
the
disc
from
the
player
and
wait
about
an
hour
until
the
moisture
evaporates.
Handling
of
the
Unit
When
Removed
From
Quick
Release
Bracket
When
the
7915M
is
removed
from
the
in-dash
bracket,
remember
these
care
tips:
1.
Do
not
drop
or
apply
shock
to
the
unit.
It
might
cause
permanent
damage.
2.
Keep
the
unit
away
from:
a:
Water
and
moisture
b:
Direct
sun
and
heat
c:
Excessive
dust
d:
Strong
magnetic
field
such
as
an
audio
speaker,
magnet,
or
TV.
3.
Your
authorized
Alpine
dealer
carries
an
optional
carrying
case
for
transporting
the
player
when
it
is
out
of
the
vehicle.
Damaged Disc
Do
not
attempt
to
play
cracked,
warped,
or
otherwise
damaged
discs.
Playing
a
bad
disc could severely damage the playback mechanism.
Storage
When
not
in
use,
place
your
discs
in
their
individual
cases
and
store
them
in
a
cool
place away from the sun, heat, and dust.
Never Attempt the Following
Do
not
grip
or
pull
out
the
disc
while
it
is
being
pulled
back
into
the
player
by
the
automatic
reloading
mechanism.
(Fig.
C)
Do
not
pull
the
unit
out
from
the
dash
while
a
disc
is
playing.
The
disc
will
be
unstable
in
the
unit
and
may
be
damaged.
Do not attempt to insert a disc into the unit when the unit power is off.
10